Wheels installation:
1.
Insert the front wheel's stem into the front guide and push the wheel's stem
until the lock snaps into place (fig. 9).
Please ensure that the wheel has been properly installed and locked in
the guide.
2.
Insert the rear wheels' stem into the rear guides and push it until the lock
snaps into place (fig. 10).
Please ensure that the wheel has been properly installed and locked in
the guide.
3.
Place the buttons on each side of the axle and put on the wheels (fig. 11).
4.
After you install the wheels on the axle, put on another shims and secure
them with cotters.
Then, put on a rim cover (fig. 12).
Please ensure that the wheel has been properly installed and locked.
Using:
1.
Front wheel lock (fig. 13).
2.
Unfolding the canopy (fig. 14).
3.
The front wheels rotate around their axis, but it is also possible to lock them
so that the stroller can be pushed straight ahead.
4.
Parking device: press to lock the stroller. Lift to unlock it.
5.
The backrest adjustment bucket is located behind the backrest (fig. 15).
6.
Footrest adjustment button (fig. 16)
7.
The stroller's footrest can be adjusted to 2 different positions. In order to
do so, press the footrest adjustment button.
Safety belts:
Note: Make sure that the position of the safety belts is correct and they are not
twisted.
1.
Insert the left and right clasp into the main buckle. You should hear a „click
sound" indicating that the belts have been properly fastened (fig. 17).
2.
In order to unfasten the safety belts, press the button on the middle of the
buckle and pull the clasps out (fig. 18).
3.
Belts length adjustment Move the clasps on the right and left belt to adjust
the length (fig. 19).
‑ 7 ‑
EN