Test Windows; Testing Requirements - Smart Start IN-HOM S.M.A.R.T. Mobile Manual De Usuario

Smart Start, Inc.

Test Windows

A test window is the period of time allowed for taking a required
test. When the IN-HOM S.M.A.R.T. Mobile device reaches the
scheduled test window, the unit will beep and a countdown timer
will appear on the display with the message "Test Required –
Please Blow". You must take a test before the timer expires. As
the timer approaches zero, the unit will beep more rapidly.
If you miss your test window, it will be logged as a Missed Test.
Missing a test is a v iolation, and all violations are reported.
Taking a
previously missed required tests.
If the IN-HOM S.M.A.R.T. Mobile device shows "Ready" on the
display, voluntary testing is permitted during non-test window
times.
You may be contacted by your monitoring authority(s) to take
a test outside of your test windows.

Testing Requirements

Lighting
The IN-HOM S.M.A.R.T. Mobile device takes a picture of the
user's face while taking a test.
illumination of the user's face. The amount of light should be
sufficient to read a magazine. Please make sure the light is not
too bright and is shining directly at your face.
Face Detection
Your IN-HOM S.M.A.R.T. Mobile device can detect the user's face
when taking a test. If the unit does NOT detect a human face, the
test will fail and you will be required to take another test. If you do
not have adequate lighting as described above, the device may fail
the face detection. Turn on more lights to correct this. It is a
violation of your Program to have another person take a test on your
device.
You MUST position your face as shown here in figure 4 with your
nose aligned with the camera.
IN-HOM S.M.A.R.T. Mobile User's Manual
t e s t after the test window does not reverse
― 10 ―
Us e a light or lamp to ensure