Operating Instructions (Original) - MIRKA Modular Trolley Instrucciones De Manejo

en (original)
Proper use of tool
The workshop cart Mirka
set up on level surfaces. Occasionally it may be necessary to drive on slightly inclined surfaces, in which case the inclination
should not exceed 2%. The cart is primarily intended for use inside workshops. Other applications should be agreed with
the manufacturer.
Electrical
It is equipped with a permanently installed 230 V mains connection with triple sockets.
Electrical and pneumatic
It is equipped with a permanently installed 230 V mains connection with triple sockets as well as an integrated compressed
air connection equipped with 3 locking couplings.
Operating instructions
Assembly instructions
Please find the separate assembly instructions with the product.
Electrical connection
Connect the power cable of the Mirka
connected to the triple socket at the same time must not exceed 3,000 W.
Pneumatic connection
Connect the workshop compressed air line to the designated compressed air connection at the back of the machine.
Compressed air devices can now be operated directly from the cart. Alternatively, the compressed air supply can also be
connected to a pneumatic box on the industrial vacuum cleaner (e.g. for operating orbital sanders). To do this, use the
preassembled hose section on the maintenance unit. The compressed air connection to the Mirka
not exceed 10 bar. It is possible to adjust the air pressure according to user needs.
Locking mechanism
Important: The drawers must be fully closed before locking / unlocking the unit.
14
Mirka® Modular Trolley
® Modular Trolley is mainly used for the storage of tools and consumables. The cart may only be
®
Modular Trolley to the mains supply. The total power consumption of appliances
Airsupply to the regulator
Distribution of air to the machines
®
Modular Trolley must