Installation Steps - PNI SafeHouse HS008 Manual De Usuario

Mute alarm / Stop the alarm -
Alarm duration is set during equipment operation. The alarm duration cannot be modified during device
hibernation -
5. INSTALLATION GUIDE
General installation principle
Although the detector has powerful performance, the following improper installation manner should be
avoided as possible during the installation process to ensure that the detector can play better and more
stable detection performance.
Don't install it beside the road
Far away from high voltage
Don't install it in an insecure place
Ensure to install it in a place with sunlight to charge
The recommended installation height is 2 meters

6. INSTALLATION STEPS

a) Draw a line on the installation position to make the
positioning hole. Then hammer it into the expansion
piper as the figure shows.
b) Screw in the screws with a cross screwdriver in
the clockwise direction as the figure shows:
7
EN