Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2 IN 1 FLARING & SWAGING TOOL:
FLARING
Yoke
Diamond
Flaring Cone
Bar
Tube
Positioning
Plate
01. Use a reamer to clean the tube. Insert tube
into the appropriate hole. Slide the Tube
Positioning Plate to the hole and make sure the
tube touches the Tube Positioning Plate lightly.
Then slide the Yoke to the top of the tube.
03. Flare the Copper Tube by turning the
Handle on top of the Yoke clockwise
until the Yoke can't be tightened
anymore. It means the Flaring is done.
NOTE:
After several uses clean the debris off the cone to ensure the smoothness of the cone. Also, use
lubricant at the thread to lubricate, and prevent rust for a longer lifespan.
Arrow Indicator
Indicator
Side Bar
02. Line up the Arrow Indicator on the
Yoke with the Indicator on the bar.
Then tighten the Side Bar on the Yoke.
Handle
04. Turn the Handle on top of Yoke counter-
clockwise. Then release the side bar to
move the Yoke to the back. Open the
Bar to remove the flared tube.
2
EN
2 IN 1 FLARING & SWAGING TOOL:
SWAGING
Yoke
Swaging
Head
Bar
Tube
Positioning
Plate
01. First remove the Cone and fit the appropriate
sized swaging head into the Yolk. Use a reamer
to clean the tube. Insert the tube into the
appropriate hole. Position the tube, so it is about
the same length of the Swaging Head above the
bars. Then slide the Yoke to the top of the tube.
03. Expand the Copper Tube by turning the
Handle on top of the Yoke clockwise until
the Yoke can't be tightened anymore.
It means the Expanding in done.
NOTE:
After several uses clean the debris off the swaging heads. Use lubricant on the thread to
lubricate, and prevent rust for a longer lifespan.
Arrow Indicator
Indicator
Side Bar
02. Line up the Arrow Indicator on the
Yoke with the Indicator on the bar.
Then tighten the Side Bar on the Yoke.
Handle
04. Turn the Handle on top of Yoke counter-
clockwise. Then release the side bar to
move the Yoke to the back. Open the
Bar to remove the expanded tube.
3
Publicidad
