AEG CS141 Serie Manual De Inicio Rápido página 5

If you use the DHCP mode
The GENEREX Netfinder is a small freeware tool that can help
you in case of using DHCP and you need to know the IP address
of your CS141.
The Netfinder will search for all CS141 devices inside your net-
work and display them accordingly.
Download this little helper directly from our web side:
www.generex.de
Run the Setup Wizard
On very first login, the CS141 will start a tool that will help you
with the basic configuration:
"System Setup Wizard".
The Setup Wizard will guide you through the most important con-
figuration steps
Note:
In case of the wizard will not start automatically, you may launch it
by clicking:
- System
- Wizard
5. Manual configuration
Select your language
1. On the drop-down menu, select
- System
- General
2. At Region, select your preferred system „Language".
3. With „Apply", settings will be saved.
Choose your UPS
1. Under „Devices", open the menu „UPS" and click on „Setup".
2. At „Model", select the UPS you want to connect to the CS141
3. Press „Apply" to save your settings.
Configure the local system time
The time is important for accurate event logging.
1. Under „System", go to
2. For the quick configuration, just press:
- Set System Time
Note:
The CS141 provides a preset of time servers - feel free to
customize them to fit to your network.
Enter a valid IP address
When dealing with large network infrastructures, a static IP
address is recommended.
1. Under „System", select „Network".
2. Enter valid IP address data::
- IP address
- Subnet mask
- Default gateway
- Default DNS server
3. Press „Apply" to save your settings
„Date & Time".