Lexmark 22W0050 Manual De Instrucciones página 16

Solution 5
If the printer is connected to the computer through another device:
1
Disconnect the USB cable from any other device, such as a USB hub or switch box.
2
Directly connect the cable to the printer and the computer.
Solution 6
1
Press to turn the printer off.
2
Disconnect the power supply cord from the wall outlet.
3
Disconnect the other end of the power supply cord from the printer.
4
Reconnect the power supply cord to the printer.
5
Plug the power supply cord into the wall outlet.
6
Press to turn the printer back on.
Cannot print from digital camera using PictBridge
Solution 1
Enable PictBridge printing on the camera by selecting the correct USB mode. For more
information, see the digital camera documentation.
Solution 2
1
Disconnect the camera.
2
Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera
documentation to determine whether it is PictBridge-enabled.
Solution 3
Use only the USB cable that came with the camera.
Solution 4
Remove the memory card or the flash drive from the printer.
Removing and reinstalling the software
If the printer is not functioning properly, or if a communications error message appears when
you try to use the printer, you may need to remove and reinstall the printer software.
1
Click Start Programs or All Programs
2
Select Uninstall.
3
Follow the instructions on the computer screen to remove the printer software.
4
Restart the computer before reinstalling the printer software.
Lexmark 350 Series.
16