Technical Specifications - Comelit 1469 Manual Tecnico

Art. 1469 is an interface for the management of
hybrid video entry phone system configurations with
door-entry phones and door entry monitors using
2-wire technology (SimpleBus and SimpleBus2) and
devices using IP technology for the basic system
structure (external units, switchboards, actuator
modules, call logs, etc.).
The 2-wire door-entry phones and door entry monitors
can receive calls from the ViP external unit and forward
commands to ViP devices (self activation, call to main
and/or secondary switchboard, actuator control, view
ViP cameras, view RTSP cameras, etc.).
Fig. 1
1.
2. 3. 4. 5. 6.
Fig. 1
1. LL terminals
Connection to the Simplebus1 or Simplebus2
line
2. Jumper for selecting the bus used
• Simplebus1
• Simplebus2
• Automatic bus selection
3. DIP-switches for reboot with predetermined
network settings and carrying out the factory
reset procedure
+ -
4. Power supply terminals 33 VDC
5. RJ45 Ethernet port
LED
6. indicating Ethernet connection
6
LED
Off No Ethernet connection
Ethernet connection present,
Flashing
communication active
Ethernet connection present, no
Steadily lit
active communication
Main features
• All ViP devices are compatible with art. 1469.
• Art. 1256 can only be controlled on the Simplebus
riser.
• An intercom call cannot be made between two
separate Simplebus risers.
• Management of audio and audio/video calls from/
to Simplebus devices.
• Conversion and mapping of messages from
Simplebus to ViP and vice-versa.
• Switchboards may be ViP only.
• A secondary Simplebus external unit cannot be
installed.

Technical specifications

+ - terminals power supply
33 VDC
voltage
DC input absorption in
95 mA - 3,1 W
standby
100 mA 3,2 W
LL max. absorption with
1210A (Simplebus2)
125 mA 4 W
LL absorption in standby with
50 mA 1,6 W
1210A (Simplebus2)
120 mA 4 W
Max. absorption with
Simplebus1 configuration
130 mA 4.3 W
Absorption in standby,
100 mA 3,3 W
Simplebus1 configuration
Maximum number of
Simplebus1 audio internal 100
units
Maximum number of
Simplebus2 video internal 100
units
Ethernet connection distance
100 m
with 1440, IN port
Ethernet connection distance
150 m
with 1440, OUT port
Ethernet port 10/100 Mbps
Operating temperature (°C) -5 to +50
Operating humidity (max. RH) 95%
90x70x59 mm
Dimensions
(4 DIN modules)
Programming via ViP Manager
All art. 1469 configurations can be implemented via
PC and ViP Manager configuration software, which is
available to download free of charge from the website
pro.comelitgroup.com
When connecting the PC to the ViP network via
art. 1440, use the red Comelit cable art. 1449.
Compatible Simplebus devices
6601W
ICONA DOOR ENTRY MONITOR, WHITE.
SIMPLEBUS2 SYSTEM
6701W
MINI HANDSET DOOR ENTRY MONITOR.
WHITE. SBTOP SYSTEM
6721W MINI HANDS-FREE DOOR ENTRY
MONITOR, WHITE. SBTOP SYSTEM
6741W MINI HANDS-FREE WI-FI DOOR ENTRY
MONITOR. 2-WIRE SYSTEM
6801 MAXI SERIES 7" DOOR ENTRY MONITOR.
SBC SYSTEM
20034801 PLANUX MANAGER 3.5" TOUCH-SCREEN
SYSTEM MANAGER, WHITE
1256 DIGITAL ACTUATOR RELAY ACCESSORY,
SIMPLEBUS SYSTEM
1412 1IN-4OUT CONNECTION TERMINAL. SBC
SYSTEM
1414 RISER DISTIBUTOR MODULE, SIMPLEBUS
SYSTEM
1214/2C CONNECTION TERMINAL, SIMPLEBUS 2
AND SIMPLEBUS COLOR
1214/2G GENIUS MONITOR DISTRIBUTION
TERMINAL
1215 CONNECTION TERMINAL, SIMPLEBUS2/
COLOR/KIT
1229A ADDITIONAL RINGTONE ACCESSORY FOR
SIMPLEBUS2 SYSTEM
2628 STYLE SERIES ELEGANCE DOOR-ENTRY
PHONE, WHITE. SIMPLEBUS2 SYSTEM
2638
STYLE SERIES BASIC DOOR-ENTRY
PHONE. SIMPLEBUS2 SYSTEM
2619
ELEGANCE VERSION DOOR-ENTRY
PHONE, SIMPLEBUS TOP INTERCOM
6228W
HANDS-FREE DOOR-ENTRY PHONE,
SIMPLEBUS/KIT SYST., EASYCOM SERIES
- WHITE
6750W MINI HANDS-FREE DOOR-ENTRY PHONE
AND AIL. S2 A/V SYSTEM
2708W MINI DOOR-ENTRY PHONE, 2 BUTTONS,
SIMPLEBUS AUDIO
2738W DOOR-ENTRY PHONE WITH 2 BUTTONS
FOR SIMPLEBUS TOP A/V. MINI SERIES
2719W DOOR-ENTRY PHONE WITH 5 BUTTONS
FOR SIMPLEBUS TOP A/V. MINI SERIES
Reboot with predetermined network settings
This procedure is used to restart the module with the
default network parameters.
In the event of a further restart the module:
• will restore the parameters from the previous
configuration, if the user has not made any
changes;
• will start up with the new network parameters,
if the parameters have been changed using ViP
Manager.
} DIP-switches set to OFF
1. Cut off the device power supply
2. Set DIP 1 to ON
3. Restore the device power supply
4. Wait for approximately 20-40 sec., until the LEDs
flash slowly and alternately (1 sec. red / 1 sec.
green)
5. Set DIP1 back to OFF
» The green LED will flash for 5 sec.
» The device will start with the default network
settings.
• The saved parameters will be recovered at a
subsequent device restart process.
Restore factory settings
This procedure is used to restore all the parameter
values to their factory settings, and to clear all device
configurations.
} DIP-switches set to OFF
1. Cut off the device power supply
2. Set all DIP-switches to ON
3. Restore the device power supply
4. Wait for approximately 20-40 sec., until the LEDs
flash rapidly and alternately (0.1 sec. red / 0.1 sec.
green)
5. Set the DIP-switches back to OFF
›› The red LED will flash for 5 sec.
›› The device will restart.
7