Pre-Assembly; Planning Assembly - LUCCA HS93362 Manual De Instrucciones

Pre-Assembly

NOTE: Hardware not shown to actual size.

PLANNING ASSEMBLY

Before beginning assembly of product, make
sure all parts are present. Compare parts with
Hardware Included and Package Contents lists. If
any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact
customer service for replacement parts.
Portable Installation Method Figure 1
1. Ensure the heater is switched off and unplugged,
then turn the heater upside down.
2. Remove the 12 screws body.
3. Align the mounting holes on the foot with the
mounting holes on the heater.
4. Insert the 3 screws and tighten.
5. Repeat these steps for the other feet.
10
Figure 1