trackilive TL-10 4G Manual De Uso página 9

Turning "ON" the tracker
1. Take the tracker outside so that it has the sky view.
2. Slide the power button towards "ON" indicator, the blue led will turn on and/or the blue
with green led will start flashing.
3. Put the tracker down and wait for 15 minutes. The tracker will carry out initial GPS positio-
ning. This is required for the device to operate correctly. The tracker will then be ready for
use and can be activated.
NOTE: this procedure is only required the very first time the tracker is turned "ON".
Activating the tracker
1. Open your internet browser and go to the following website: www.trackilive.com
2. Select your language.
3. Click on "Activate Tracker" and follow the instructions on the screen.
Start tracking:
You can directly start tracking from our online tracking platform by visiting www.trackilive.
com, or download our mobile application by searching "Trackilive" in Apple's app store or
Google's play store for free of charge.
LED Indicator Definition
Green Indicator: LET "Flash": LTE communications start; „Continuously in bright status": no
LTE signal; „off": power off or in sleep mode
Blue Indicator: GPS "Flash": GPS location successful; „Continuously in bright status": GPS
signal searching; „off": power off or in sleep mode
Red Indicator: Power charge: „Continuously in bright status": charging; „off": power off or full
charged
NOTE: When the equipment in power saving sleep mode, the light will turn off after about 10
minutes without any operation.
EN 9