Use Of Product; Using Push Button Product; How To Use 5 Spd Dig Touch Control Product - FRECAN Urban Guia Del Usuario

USE OF PRODUCT

How to use 5 Spd Dig Touch Control Product

12 USE OF PRODUCT
12.1 Using Push
Button Product
1 2
Fig. 14: push button
Press this button to reset your
1.
product.
Product will run on 1st speed
2.
level when this button is
pressed.
Product will run on 2nd speed
3.
level when this button is
pressed.
Product will run on 3rd speed
4.
level when this button is
pressed.
Press this button to turn on and
5.
off the lamp.
12.2 How to use 5 Spd
Dig Touch Control
Product
24
3 4 5
HOOD USER GUIDE
Fig. 15: 5 Spd Dig Button
Press this button to turn on the
1.
product.Fig. 15
Press this button to decrease
2.
the motor speed.Fig. 15
Dig display You can follow which
3.
speed the product is currently
working on this display.Fig. 15
Press this button to increase the
4.
motor speed.Fig. 15
When timer button is pressed, a
5.
15-minute timer function will be
activated; display will give a
signal once the timer starts and
the motor will stop automatically
after 15 minutes.Fig. 15
Press this button to turn on and
6.
off the lamp.Fig. 15
Cleaning Periods for Metal Filters
Filters should be cleaned when "C"
signal appears on the Display or (due
to usage) every 2 or 3 weeks. To
delete "C" signal after the filters are
cleaned and replaced, press and hold
( ) button more than 3 secs (when
device is off). Letter "E" will appear on
the Display and it will switch to normal
operation. If operation before deleting
the "C" signal is required, active motor
speed will appear for 1 sec when you
press ( ) button and then the motor
will resume running.
19.12.2018