Lionelo care Thermup Double Manual De Usuario página 4

11.
Keep the device away from sharp edges and sources of heat and moisture. The device
must not be exposed to direct sunlight.
12.
Do not immerse the device or power cable in water or other liquids.
13.
Make sure the device does not overheat.
14.
Before you insert the bottle in the warmer and pour water in, make sure it is properly tight.
15.
Before you switch the device on, make sure there is water inside. Never turn the device
on when water is missing.
16.
Hot water may cause serious burning. If there is hot water in the device, carefully
handle the device.
17.
The surface of the device may get hot under the influence of hot water. Please remain careful.
18.
Do not move the device if it contains hot water.
19.
When heated food reaches the desired temperature, take the bottle out of the warmer.
Do not heat food up too long.
20.
To make sure milk is warm enough, pour out a few drops on your forearm and assess
the temperature. As for solid foods – taste it to make sure it is not too hot.
21.
Before you start cleaning the device, wait until it gets cool.
The product complies with requirements of the EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to selective collection. Do not
dispose of it together with domestic waste as it may pose a threat to the environment and human
health. The worn-out product must be handed over to the electric and electronics recycling center.
List of parts (fig. A)
1.
Cover
2.
Bottle/container basket
3.
Touch panel
4.
Milk defrosting/heating
5.
Constant temperature
6.
Food heating
7.
Quick heating/disinfecting
8.
Value down/up
9.
On/off switch
10.
Maximum water level
Defrosting and heating
1.
Place the bottle in the basket (2, fig. A).
2.
Pour water into the warmer. Water must not exceed the maximum level in the basket (10, fig. A).
3.
Choose defrosting/heating on the touch panel (4, fig. A).
4.
Choose the amount of milk in the bottle through value down or up keys (8, fig. A).
5.
The device will start working automatically 3 seconds after you select the function.
6.
The display shows heating time. When heating is over, a distinctive sound is emitted.
7.
Before you serve food, shake the bottle and then check the temperature. Take the bottle
EN ‑ 4 ‑