ARDES ARM355D Instrucciones Para El Uso página 12

The appliance has a button (3) for a blast of cold air during hot air operation,
used to fix the hairstyle.
Releasing the button returns to the previously set mode.
The concentrator (5) for directing the air flow on the hair and the diffuser
(7 – to be used with medium air flow and low temperature) for giving the hair
volume are supplied with the appliance.
To swtch off the appliance, set the Air Flow Switch to "0".
Disconnect the plug after use.
WARNING:
- Let the appliance cool down before storing it.
- Do not wrap the power cord around the appliance.
Disconnect the plug from the socket and let the appliance cool
down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasive products or chemical solvents.
Attenction: keep dry the appliance.
NEVER DIP THE APPLIANCE INTO THE WATER.
Cleaning the air inlet filter:
Cleaning the air inlet filter:
Make sure that the appliance is switched off and unplugged.
Loosen the screw and remove the dorme in the lower part of the
appliance.
Remove the filter and wash it with water only.
After carefully drying the filter,replace it correctly and fasten it in place
with the screw.
12
Maintenance
GB