Charging Battery - Uline SHARK H-10132 Manual De Instrucciones

Shark ION Power
®
Handheld x 1
IMPORTANT! Prior to first use, the lithium-ion
battery must be charged completely, even if it
comes with a partial charge.
NOTE: It takes approximately 2.5 hours to
charge battery completely.
1. Place the unit onto the ION charging dock with the
nozzle in the cradle. (See Figure 1)
Figure 1
Nozzle
Cradle
Charging Dock
1. Attach desired part/accessory if applicable.
2. Press power button. (See Figure 3)
3. Run nozzle over surface to be cleaned.
4. Press power button to turn off vacuum.
PAGE 3 OF 15
ION Charging
Dock x 1

CHARGING BATTERY

OPERATION
PARTS
Multi-Surface Duster Crevice
Pet Tool x 1
2. Plug charging dock into wall outlet.
NOTE: During first use, discharge fully to
properly condition the battery.
3. Check battery status. (See Figure 2)
Figure 2
In Use – Solid blue
Charging – Fades
Duster Crevice
Figure 3
Power
Button
Onboard Accessory
Tool x 1
Low Battery – Blinking
Charged – Dim
in and out
Tool x 1
1
Storage x 1
2
0622 IH-10132