ledscom LC-EL-150-W Instrucciones De Montaje página 5

1. Disconnect the building-side connecting
cable from the power supply and secure it
against being switched on again. To do
this, trip the corresponding circuit breaker
of the house installation.
2. drill a mounting hole (4) with 30mm
diameter and 62mm depth to install the
light properly.
3. Connect the connection cable of the
luminaire to the connection cable on the
building side. The cables must be
connected in a watertight manner (e.g. with
a cable sleeve).
Now place the luminaire in the installation
opening.
5. Turn the power back on. The installation
is now complete.
Subject to technical changes
LEDs Com GmbH, Dohrweg 2a, D-41066 Mönchengladbach, www.leds-com.de, Tel. +49 (0) 2161 - 5 75 99 76
English Ground recessed light (LC-EL-150-W) - Assembly instructions
Figure 1
1: Luminaire
2: Brackets
Figure 2
3: Connection line
4: Installation opening
04/2022