Motorola Solutions PMLR6833 Guia Del Usuario página 5

This Heavy Duty Temple Transducer is recommended for use in
manufacturing facilities, special government agencies, Special
Weapons and Tactics (SWAT) teams, special forces, and high
end security teams.
Operation
1. Wear the Heavy Duty Temple Transducer as shown in
Figure 2.
Note: Adjust using the velcro straps on the harness and by sliding
the bone vibration speaker on the Heavy Duty Temple
Transducer.
.
Wearing the Heavy Duty Temple Transducer
Figure 2:
2. Be sure to position the two bone vibration speakers on your
temples.
Note: For maximum performance, place and fix the speaker in
front of the ear by adjusting the slide arm back and forth.
For the best pick-up quality of the microphone, ensure that
the boom microphone is positioned near to the lips.
3. Turn OFF your portable radio.
4. Attach the Heavy Duty Temple Transducer connector to the
Interface Module.
5. Turn the portable radio ON, adjusting the audio volume to an
appropriate level.
3