Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the cleaning chamber and collecting tray:
To keep the appliance clean, the cleaning chamber and collecting tray are removable and must
be cleaned regularly. The cleaning chamber and the collecting tray are removable and can be
washed separately after dismantling (the fixing screw in the cleaning chamber is made of
stainless steel). These parts must be dried before being put back into service.
The cleaning chamber can be emptied by sucking it out with a vacuum cleaner or by emptying it
upside down followed by a rotating movement.
Disassembly steps:
5. Unplug the power adapter;
6. Remove the top shell (refer to the illustrations);
7. Remove the inner tray (refer to the illustrations);
8. Detach the cleaning chamber.
Bug fixes
No.
Error
Weight
1
Variation
Device not
2
working
UV lamp
3
not
working
If the device still does not operate normally after the above troubleshooting, please stop
using the product and contact PETLUX.
Possible cause
1.
The appliance is not
balanced or is unstable (No
hard floor or wooden floor).
2.
The litter box mat is in
contact with the device.
3.
Other objects come into
contact with the device.
1.
The sensor initialization may
be wrong.
2.
Error.
1.
Reconnect the DC plug and
adjust the position of the
sterilization accessory.
2.
Error
- 14 -
Solution
Rearrange the setup of the
device.
Restart the device. If it still
does not work normally,
please contact customer
service.
If it still does not work
normally, please consult
customer service.
Publicidad
