Publicidad
Idiomas disponibles
Idiomas disponibles
Lighting control instructions
How to use handset
Height Adjustable Function:
If the LED display can show the current height, press
"
" or "
" button can adjust the table height. Long press can
enable continuous rise or go down and meantime the light
starts to flicker.
Height Memory Function:
Click "M"button and LED display shows "
". Then click any
button from "
", "
", "3", "4"to achieve the height setting. In
the meanwhile, the light flickers meaning the data has been
successfully saved. Click the corresponding button and then
the desk can be adjusted to the saved height.
Reset Function:
1. When the height is different with the LED display or it shows
default code, you need to reset the desk.
2.Press and keep "
" button to adjust the desk until it goes
down to the lowest place. Then long press the "
" button for
down
more than 3 seconds to enter the reset process and LED
display shows "
"or "
". Then long press the "
" button
until it bounce up and the LED display shows the current
height, which means the reset is a success.
Anti-Collision Sensitivity Adjustment:
1.Simultaneously press and hold the "
" and "
" buttons for
three seconds to switch the sensitivity, one operation to switch
one level, divided into 4 levels,
,
,
,
.
2.The display shows "
" means the anti-collision function is
closed; the display shows "
" means high sensitivity; the
display shows "
" means medium sensitivity; the display
shows "
" means low sensitivity.
3.When the desk go up or down, it will rebound immediately
when encountering obstacles to prevent itself.
Light switch
Power switch
Light switching instructions:
After the USB is powered on, the light strip turns
on for 3 seconds and then you can switch the light.
Light Switch Options: Green/blue/red/cyan/yellow/
purple/white/seven-color gradient light/flashing light.
Touch control.
Button
LED Display
Button introduction
①
Button 'stand', suitable for standing, the first height data saved by users
②
Button 'sit', suitable for sitting, the second height data saved by users
③
Function key, use with other buttons
④
Position 3, the third height data saved by users
⑤
Position 4, the fourth height data saved by users
⑥
Upper button, adjust the desk to rise
⑦
Downward button, adjust the desk to go down
Code Processing:
1.When the LED display shows "
" or "
", please refer to the
reset function.
2.If "E01" or "E02" appears, please let the desk rest for more
than 18 minutes before it can be used normally.
3.If other codes appear and there is no response after pressing
the "
" button, please make sure that the cable is not damaged
and the connection is normal, and power off for more than 10
seconds, then turn on the power again, "
" or "
" is
displayed, then long press the "
" button to reset.
4.If the above operations are performed, the table still does not
operate normally, please contact customer service.
The following tips will help you detected and eliminate the common fault and
error. If the fault you met is not listed below, please contact with your supplier.
Only the manufacturer and professionals are capable for investigating and
correcting those fault and error.
Fault phenomenon
Method
Check if all the cables well
The desktop could not function
connected;
Rising in a low speed
The desk moving downwards
Check if overloaded,
without any operation
max loading: 50kg;
Automatically Self-Reset
Go down but not go up or go up
but not go down
The upper and downward
Reset;
height is not enough
The desk could not lifted
Overwork
Restart after suspend for 18mins while
(Duty cycle: Max 2min on/18min OFF)
connecting with power.
Check whether there are barriers
beneath the table or cables are
Press "▼"button while desk rises
entwined with other things.
This marking indicates that this product should not
be disposed with other household wastes. To
prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmental safe recycling.
1. Power supply: AC100V-240V, 50/60Hz
2. Service Environment: 0-40℃
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet
dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose
the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so
dispose of it in accordance with each country's environmental legislation, not the
general household waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when
playing, so any dangerous consequences caused by this improper action will not be on
manufacturers.
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not
have any effect on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure
that the cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a similarly qualified person in order to avoid a hazard.
13. Please make sure there is no hazard sources in your operating environment. e.g.,
do not litter the tools around. Always be careful to treat the packaging materials in order
to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
14. Keep the original package of the equipment if necessary in case of the future use in
transportation.
Publicidad
