Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Malfunction
The unit will not
power on
The air blowing
from the
EA-
T98
is not strong
enough
Circuit Diagram
Specifications
Model No.
Watt(W)
Water Tank Capacity (L)
Gift Box Size LxWxH(MM)
N.W/PC (KGS)
Ice Pack
Timer
Voltage/Frequency
Thank you for trusting
Disposal of electrical appliances and / or electronic devices cannot be
treated in the same way as normal household waste. They must be
recycled in the appropriate facilities. For more information about your
collection and deposit, consult your local competent authority or your
distributor.
Possible reasons
1. Power off , poor connection or not
connected to the main power supply
2. Not switch on the main switch e back
of body
3. The desired cooling or heating has
not been selected
4. The fuse has blown
1. The cooling speed is set too low
2. The mesh filter or evaporation pad is
blocked
Artrom products,
Solution
1. Plug in and switch on the
main power supply.
2. Switch on the main switched
back of body.
3. Press any one of the buttons
by remote control or control
panel button
1. Select a higher cooling speed
by pressing the relevant cooling
speed button
2. Clean the mesh filter or
evaporation pad
EA-T95
80
4
440x260x785mm
6.2
2pcs
7 hours and 30 minutes
220-240V ~50Hz
www.artrom.es
12
Publicidad
Tabla de contenido
