Worx Professional WU643 Traducción De Las Instrucciones Originales página 5

This tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning: To be accurate, an estimation of exposure level in the
actual conditions of use should also take account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well
lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration
accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across
a number of days.
Accessories
• Dust bag
• Dust extraction adaptor
• Sanding paper (120#)
• Paper punch hole
If using sanding paper without dust holes, you must use the
paper punch to make holes.
All manuals and user guides at all-guides.com
C or less
0
1pc
1pc
1pc
1pc
Sanding Paper size:
93*230mm for no hook & loop (Clamp only)
93* 182mm for hook & loop
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked
with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer advice.
5