CyberPower CL1000VR Guia Del Usuario

CL1000VR / CL1500VR / CL2000VR
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions. Please read and follow all instructions carefully during installation and operation of the
unit. Read this manual thoroughly before attempting to unpack, install, or operate the Voltage Regulator.
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area free of conductive
contaminants. (See the specifications for the acceptable temperature and humidity range.)
CAUTION! To reduce the risk of overheating the Voltage Regulator, do not cover the unit's cooling vents and avoid exposing the unit to
direct sunlight or installing the unit near heat emitting appliances such as space heaters or furnaces.
CAUTION! Do not plug the unit input into its own output.
CAUTION! Do not allow liquids or any foreign object to enter the unit. Do not place beverages or any other liquid-containing vessels on or
near the unit.
CAUTION! In the event of an emergency, press the RESET/OFF switch to OFF position and disconnect the power cord from the AC
power supply to properly disable the unit.
CAUTION! Unplug the unit prior to cleaning and do not use liquid or spray detergent.
INSTALLING YOUR AVR SYSTEM
UNPACKING
The box should contain the following:
(1) Unit x 1; (2) User Manual x 1;
OVERVIEW
The CL series guarantees reliable and stable power output for POS systems, home theater systems, home appliances, computers and
laptops. The power conditioner has built-in Automatic Voltage Regulation (AVR) function to offer stabilized AC power output, especially
suitable for areas with unstable utility or for use with generators. The product has built-in surge and spike protected outlets, EMI filter and
overload protection to safeguard connected equipment.
The total power consumption of all equipment plugged into the CL series must not exceed the "Output Power Capacity" rating listed in the
Specifications table.
1. Normal Mode LED
The green LED will light when utility power is normal.
2. AVR Mode LED
The yellow LED will light when utility power is abnormal and the unit will work in AVR mode.
3. Input abnormal voltage LED
The red LED will light when utility power is not in input voltage range as defined in "TECHNICAL SPECIFICATION".
4. RESET/OFF Switch
Press the switch to RESET position to turn ON the unit. Press the switch to OFF position to turn OFF the unit. The circuit breaker is in
the OFF position. When overload condition is detected, the switch will be tripped to OFF position for protection.
5. Surge Outlet
Provides surge protection for devices that don't require AVR function.
6. AVR Outlet
Provides AVR and surge protection.
The unit has several AVR and surge suppression outlets to offer stabilized AC output for connected equipment.
7. Input power cord
Connect to utility power.
Copyright © 2021 Cyber Power Systems, Inc. All rights reserved.
Voltage Regulator
User's Manual
BASIC OPERATION
TECHNICAL SPECIFICATIONS
Model CL1000VR
Output Power Capacity (VA) 1000
Output Power Capacity (Watts) 500
Nominal Voltage
Input
Acceptable Voltage Range Tolerance
Frequency
Output
Output Regulation
Overload Protection
Surge Protection
Total Outlets
Environmental
Operating Temperature
Operating Relative Humidity
Physical
Maximum Dimensions
(W x H x D) (mm)
Weight (kg) 1.62
TROUBLESHOOTING
Problem Possible Cause
The unit is not connected to an AC outlet.
The unit will not turn
on.
Mechanical problem.
RESET/OFF switch is tripped due to overload
protection.
Outlets do not
Unit is automatically turned off due to over
provide power to
temperature protection.
equipment
Unit has been damaged by a surge or spike.
Cyber Power Systems S.A. de C.V.
ANICETO ORTEGA NO. 634, COL. DEL VALLE CENTRO,
ALCALDÍA BENITO JUÁREZ, C.P. 03100, CIUDAD DE
MÉXICO, MÉXICO.
Tels: (0155)4622-8654
www.cyberpower.com.mx
All rights reserved. Reproduction without permission is prohibited.
CL1500VR CL2000VR
1500 2000
750 1000
120Vac
82-148Vac
50/60Hz
12%
Circuit Breaker
245 Joules (L-N)
NEMA x 8 (4 SURGE + 4 AVR)
0° C to 40° C
0 to 90%
205 x 115 x 146
2.28 3.28
Solution
The unit must be connected to a 120 50/60Hz outlet.
Contact CyberPower Systems Technical Support.
Unplug all connected equipments and reset the switch.
Reduce the amount of equipment which is connected
to AVR outlets and wait for 30 minutes. The output
power will recover automatically.
Contact CyberPower Systems Technical Support.
CyberPower Systems (USA), Inc.
5555 12th Avenue East, Suite 110, Shakopee,MN55379
Phone: (952)403-9500
Fax: (952)403-0009
www.cyberpower.com
K01-C000652-02