auna DiscoFever Manual De Instrucciones página 22

EN
Video: Use the supplied video cable (yellow) to connect the video output
(Video Out) of the karaoke system to the video input (Video In) of your TV
set/digital projector/etc.
In most cases, you will have to select the input source on the TV set/digital
projector accordingly. While some units have corresponding menus, others
may have input channels that are behind or ahead of the regular receiving
channels or on "0". Please consult the operating instructions/help files of
your TV set in this regard.
AUDIO LINE OUT: Use the supplied cinch cable (red-white) to connect the
audio output (Audio Out) of your karaoke system to the audio input of your
stereo system or TV set.
AUDIO LINE IN: Connect external sound sources to the line-in of the
karaoke system. Make sure that the external media device you are using
plays sound. Then adjust the output volume (master volume) on the karaoke
system. Please note: As soon as a device is connected to the line-in, the
karaoke system automatically switches to this mode. Disconnect the line
connection to switch to the other modes (CDG/ USB/BT).
22