oneConcept Marketeer Manual De Instrucciones página 11

EN
OPERATION
Battery:
The unit is operated with a 9 V battery. Insert the battery as indicated on the
battery compartment.
Setting up:
Make sure to place the unit in a horizontal position.
Simple weighing:
Switch on the unit by pressing the "On/Off" button. First, all segments of the
display are shown. Wait until the value "0" is shown on the display before
weighing.
Tare function:
Press the "Tare" button during the first measurement until the value "0" is
shown on the display. Now you can start a second measuring process which
will only show the added weight.
Switching off the unit:
You can use the "On/Off" switch. Alternatively, the unit switches off
automatically after 2 hours of non-use.
Unit selection:
You can switch between the kilogram (kg) or pound (lbs) scale by pressing the
"Mode" button.
Counting function:
Place a reference weight on the scale. Press the "pcs" button until the value
"100" is shown on the display. You can alternate between the values 100, 75,
50 and 25 by repeatedly pressing the "pcs" button.
11