Functions
Play CDs
Play USB and SD
storage devices.
Program
BT and AUX playback
•
Open and close the CD and USB/SD
compartments by pressing the bottom right
corner of the acrylic glass door.
•
Select the playback function with the mode
switch on the bottom right. Then use CD-
MP3/USB/SD to select the corresponding
playback instance (in this case: CD).
•
The switch, which is modelled on the tone
arm of a record player,
•
causes the CD placed on the CD support to
be rotated.
•
Put on a CD and close the acrylic door.
Control the playback of the CD with the
PLAY/PAUSE, +/- 10 Tracks (skip 10 tracks),
Back, Next, Repeat and Random buttons.
•
Open and close the CD and USB/SD
compartments by pressing the bottom right
corner of the acrylic glass door.
•
Select the playback function with the mode
switch on the bottom right. Then use CD-
MP3/USB/SD to select the corresponding
playback instance (in this case: USB/SD).
•
Insert a USB or SD medium.
•
Control the media playback in the same way
as described above for CD playback on the
unit or by remote control.
•
For programming playlists.
•
Connect an external player (typically an MP3
player, CD player, smartphone or tablet) via
the AUX cable on the rear or connect your BT-
capable smartphone/tablet to 'GRACELAND'
and then play your media library via the
jukebox.
•
Control playback on your external device or
via the BT panel on the jukebox side.
EN
19