Power On/Off; Video Recording - Wiseup DVR-0022A Guia Del Usuario

your camera. Camera will not work without a Micro SD card.
>> Camera is fully charged when the red light indicator is solid on.

1) POWER ON/OFF

(1) Hold down the Power On/Off Button for 2 seconds, the camera will be turned on
and enter into standby mode automatically. The camera will vibrate once for 5
seconds and the red light indicator will stay illuminated.
(2) Power off the camera by holding down the Power On/Off Button for 2 seconds,
the camera will be turned off. The camera will vibrate twice and the red light
indicator will turn off.
(3) The camera will shut down automatically if the camera is in standby mode
without any operation in 1 minute.

2) VIDEO RECORDING

(1) Power on the camera by holding down the Power On/Off Button for 2 seconds
and the camera will enter into standby mode automatically.
(2) Press and hold the Video/Camera Button for 2 seconds, the camera will start
video recording. The camera will vibrate once and the red light indicator will flash
once and turn off.
(3) Press the Video/Camera Button once to stop video recording and the camera
will enter into standby mode. The camera will vibrate twice and the red indicator
light will be illuminated.
(4) Press and hold the Video/Camera Button for 2 seconds to resume video
recording.
Attention:

The camera will save video files automatically every 10 minutes.
 Video format: avi

Video resolution: 720 x 480
3) CAMERA/STILL PHOTOGRAPHY
(1) Power on the camera by holding down the Power On/Off Button for 2 seconds
and the camera will enter into standby mode automatically.
All manuals and user guides at all-guides.com