can use the central section (A) independently or both sections (B) at once.
Zone 3#
Zone 4#
Activate the Double zone
Press the heating zone selection control of the double loop
heating zone (e.g. 6,)
The power level indicator flash, then press "◎" , after 5
seconds, the indicator stop flash, the double loop function is
activate, and power level shows "6" and "=" alternately.
Deactivate the Double zone
Press the heating zone selection control of the double loop
heating zone, the power level indicator flash.
Press "
◎
", the double loop function will be cancelled, and power
level return to "6" .
Note:
1、 The double loop is available only in 3# and 4# cooking zones
2、 You can select the function from level 1 to level 9.
3.3.5 Timer control
You can use the timer in two different ways:
a) You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the
set time is up.
b) You can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99 minutes
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
EN-11