Device Basic Startup - Urmet 1093/504A Guía Rápida

3

DEVICE BASIC STARTUP

For a quick startup of the device, follow the procedure below:
Connect the desired analog cameras to HD-SDI input channels.
Connect the mouse to the USB port.
Connect the HDMI/ VGA output to the respective HDMI/ VGA monitor in order to display the HD-SDI cameras
previously connected.
Connect the network cable to LAN port, if needed.
Power the device on, inserting the power supply connector into the plug and set the switch to position 1 (if
requested).
NOTE
For further details, see the instructions manual in the CD provided with the product.
DS1093-119A
All manuals and user guides at all-guides.com
34