Cleaning & Maintenance; Replacing The Filter - Allergy Pro AP200 Manual

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67
CLEANING & MAINTENANCE
The Allergy Pro
AP200 professional air purifier
is almost maintenance free! Our filter lasts up to
twelve months, depending on use and environ-
ment conditions. It is recommended to replace the
filter every twelve months.
Before replacing the filter of your Allergy Pro
AP200 professional air purifier, turn off and un-
plug the unit from the electrical outlet and read all
safety instructions and important warnings in this
owner's manual.
1.
All manuals and user guides at all-guides.com

REPLACING THE FILTER

1.
Make sure unit is turned off and unplugged. Re-
lease the inlet grill by pressing on the locking latch
(see diagram of "Main parts").
2. Remove the inlet grill from the unit as shown be-
low.
3. Grasp the left and right frames of the filter through
the indentations on the sides of the filter enclosure
and remove the filter.
4. Insert a new filter, then snap the inlet grill back into
position.
2.
3.
4.
25
en

Publicidad

Tabla de contenido
loading

Tabla de contenido