TruVue TVFMU Guia De Instalacion página 3

installing to wall
1
wood Stud wall
Use wall plate (L) as a template, make sure it is
level, and mark four mounting holes along the
center lines of the wood studs. Drill four 3/16" (5
mm) dia. holes 2" (51 mm) deep. Level wall plate
(L) and attach to wall with four long bolts (H) and
four washers (J). Tighten screws firmly. Do not
overtighten.
warning
Do not over tighten screws, or
Concrete wall
Level wall plate (L) and use as a template to
mark four mounting holes. Drill four 3/8" (10 mm)
dia. holes to a minimum depth of 2" (51 mm).
Insert four anchors (i) into holes and secure wall
plate (L) with four screws (H) and four washers
(J). Tighten screws firmly. Do not overtighten.
warning
wall plate
plaster/
dry wall
wall plate
plaster/
dry wall
All manuals and user guides at all-guides.com
damage may occur.
COrrECT
concrete
inCOrrECT
concrete
J
L
H
H
J
L
J L
H
1
Drill holes and insert anchors (i).
2
Place plate (L) over anchors (i). Secure with long bolts (H) and
washers (J).
3 of 24
warning
Long bolts in
center of stud.
STUD
TOP CUTawaY ViEw
i
concrete
surface
J
L
H
ISSUED: 09-11-09 SHEET #: 202-9372-1
i
i