Publicidad
Idiomas disponibles
Idiomas disponibles
Anomalies and repair
- Take the appliance to an authorised technical support service if product is damaged or other problems arise. Do not
attempt to disassemble or repair the appliance yourself as this may be dangerous.
- In case of breakdown call the customer service telephone number indicated in the guarantee sheet. Do not attempt
to disassemble or repair the appliance yourself as this may be dangerous.
- If any anomaly is detected, check the following table:
Anomalies
Possible cause
Solution
Has the power code been disconnec-
ted.
Is the tank full indicator blinking?
(the tank is full or in a wrong position).
Is the room temperature above 35ºC or
below 5ºC.
The dehumidiying
Is the air filter clogged. Is the air inlet
function does not
or air outlet obstructed.
work
Is the air inlet or air outlet obstructed?
Operation is noisy
Is the unit tilted or unsteady?
Is the filter clogged.
NB: These specifications are subject to change without notice of purpose of improvement.
NB: By virtue of the conditions of fabrication of this product, the maximum absorbed power can differ from
that specified.
NB: By virtue of the conditions of fabrication of this product, the maximum used power can differ from that
specified.
For EU product versions and/or in case that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included in a collection, classification
and recycling system. Should you wish to dispose of them, use the appropriate public recycling bins for
each type of material.
- The product does not contain concentrations of substances that could be considered harmful to the
environment.
- This symbol means that in case you wish to dispose of the product once its working life has ended, take it to an
authorised waste agent for the selective collection of Waste from Electric and Electronic Equipment (WEEE).
- This symbol means that product can't be covered.
- This symbol means that product must not be used near water
This appliance complies with Directive 2006/95/EC on Low Voltage, Directive 2004/108/EC on Electromagnetic Com-
patibility.
All manuals and user guides at all-guides.com
12
Solution
Plug the power cord into the outlet.
Empty the water in the water tank and then reposi-
tion the tank.
This product is not designed to be used in an
environment too cool or too hot. The protection
device is activated and the unit cannot be started
temporarly.
Clean the air filter as instructed under cleaning
section.
Remove the obstruction fromthe air inlet or outlet.
Move the unit to a stable and sturdy location.
Clean the air filter as instructed under cleaning
section.
Publicidad
