FONESTAR RDS-523HD Manual De Usuario página 6

EN
START UP
When you turn on the receiver for the first time, a channel list will be loaded by default. You can modify this
channel list in the CHANNEL menu option or add more channels by searching the desired satellites.
CHANNEL LIST - QUICK SETUP MENU
- Remove the channels from the existing list MENU>CHANNEL>DELETE ALL CHANNELS
- Exit the menu by pressing the MENU button on the remote control
- To access the Quick Setup menu, press the L/M button on the remote control twice. In this menu you will
find the following options:
- SINGLE SATELLITE SEARCH: allows you to search for channels on a single satellite. To do so, select
this option, press the OK button, modify the satellite parameters, and press the blue button. To finish,
select the type of search (automatic, blind, or manual) and press OK to start the search.
- MULTI SATELLITE SEARCH: allows you to select several satellites to perform a channel search on all
of them. To do this, select this option, press the OK button, select the satellites with the OK button on
the remote control, and press the blue button. Finally, select the type of search (automatic, blind, or
manual) and press OK to start the search.
- RESTORE PROGRAM: loads the default channel list.
NOTE: this quick setup menu will only appear when there is no channel in the channel list.
CHANNEL LIST - ADD MORE CHANNELS
If you want to search for more channels and add them to the list you already have, go to the INSTALLATION
menu option. From this menu, you can perform a search on a single satellite or on several at once.
- SINGLE SATELLITE SEARCH: go to the ANTENNA SETTING menu option, change the satellite
parameters, and press the blue button. To finish, select the type of search (automatic, blind, or manual)
and press OK to start the search.
- MULTIPLE SATELLITE SEARCH: go to the SATELLITE LIST menu option, select the satellites with the
OK button on the remote control, and press the blue button. To finish, select the type of search
(automatic, blind, or manual) and press OK to start the search.
NOTE: the default PIN code is set to 0000.
- 6 -