Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Bringing into use / Cleaning and care / Disposal
pressure of 2.5 bar. You can check the
operating pressure using the pressure
gauge
(see "Building up the operat-
4
ing pressure").
j
P ull the safety valve
as it will go to release the residual pres-
sure in the container
cleaning and care
Q
note: Clean the pressure sprayer after
each use!
clean the pressure
Q
sprayer
j
U nscrew the spray nozzle
j
C lean the spray nozzle
water.
j
I f the spray nozzle
clean it by pushing a needle through it.
j
F lush through the pressure sprayer,
pipes and tubes with water.
j
C lean the surfaces of the product with
a moist cloth.
clean the suction hose
Q
Clean the suction hose
j
L oosen the union nut of the suction hose
on the container
13
j
P ull the suction hose
tank
.
5
j
C lean the suction hose
water.
j
A fter cleaning, insert the suction hose
back in its opening on the tank
18
j
T ighten the union nut
34 GB/MT
56222_flo_Drucksprüher_Content_LB5.indd 34
upwards as far
3
.
5
.
11
under running
11
is clogged,
11
as follows:
18
.
5
out of the
18
under running
18
.
5
hand-tight.
13
Store the pressure
Q
sprayer
j
C lean the pressure sprayer before storing
it away.
j
R emove any leftover spray product from
the tank and the pipes.
j
S tore the pressure sprayer in a dry,
dust-free place.
Disposal
Q
The packaging is made entirely
of recyclable materials, which
you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product.
Product Information:
Pressure Sprayer
Model no.:
Z30597
Version:
11 / 2010
®
02.12.10 16:21
Publicidad
Tabla de contenido
