Usb Device Connection - Packard Bell DVX 360 USB Manual De Instrucciones

Zoom
Both ZOOM in/out and Zoom pan functions are available for JPEG
pictures. With the Zoom button, you can zoom in or out for JPEG
pictures. An OSD message will indicate the current ratio.
If zoom mode is on, the Fast Forward
are used to control the ratio of zoom in/out. With ZOOM mode off,
a picture is scaled to fit the screen
Note: during ZOOM function, slide show transition and
image transformation are disabled.
Thumbnails
The Sub-menu button is used to enable JPEG thumbnail mode. Up to
nine thumbnail pictures will be displayed. With the Next
Prev buttons you can display the next and previous nine pictures
in the current directory. Each of the nine pictures will be numbered
from 1 to 9.
By pressing a numeral button the corresponding picture will be
enlarged to full-screen, and the thumbnail mode will be cancelled.
Music Slide Show
With the Program button in the fully stopped state you can enter or
exit the music slide show. With the A-B button you can select an
MP3 file as background audio.
Note: during Music Slide Show, image transformation,
zoom and thumbnails are not allowed.
USB D C
EVICE ONNECTION
To connect a USB mass storage device to the DVD player:
1. Insert your USB device into the USB 2.0 socket on the front
panel.
2. If the USB mode does not launch automatically, press the DVD/
USB button to switch to USB mode.
To disconnect:
1. Remove the USB device to quit the USB mode.
Warning: Do not remove the USB device until the file
transfer is complete. Failure to do so may result in the
corruption or loss of file(s).
USB D F
EVICE UNCTIONS
Use the SMART NAVI menu to Rename, Move/Copy, Delete and
display Properties. To open the SMART NAV 1 menu press the
DVD/USB button and select either DVD or USB from the drop down
.
list
Copy files from a disc to a USB mass storage device
1. Press the DVD/USB button and select USB to open the SMART
NAV1 menu.
2. In the SMART NAV1 menu, press the Up/Down buttons to high-
light the target folder on the USB disc you wish to copy the files
to.
3. Press the Select button to select the folder.
4. Press the DVD/USB button to open the source disc menu.
5. In the disc menu, press the Transfer button to open the sub
menu.
Setting up your DVD player
8 -
All manuals and user guides at all-guides.com
and Rewind buttons
.
and
6. Press the Up/Down buttons to highlight the SELECT option and
press OK.
7. Press the Up/Down buttons to highlight the file or files you wish
to copy.
8. Press the OK button to select each file in turn. The selected files
will change colour. If you make a mistake press the OK button
repeatedly until the file is deselected.
9. After your selections have been made, press the Stop button.
10. Press the Transfer button to open the sub menu again and use the
Up/Down buttons to select COPY.
11. Press OK to begin the file transfer.
12. The transfer progress can be viewed on the screen.
Rename a file
1. In the SMART NAVI menu, press the Transfer button and select
Rename.
2. In the on-screen keyboard use the navigation arrow and OK but-
tons to enter the name you want to use.
3. Press the Stop button to finish.
Create a New Folder
1. In the SMART NAVI menu, press the Transfer button.
2. Use the Up/Down buttons to select New Folder.
3. In the on-screen keyboard use the navigation arrow buttons to
enter the name you want to use.
4. Press the Stop button to finish.