Meter Memory Function - BeneCheck Uric Acid Meter Manual De Instrucciones

Meter Memory Function

Chapter 4
• Uric Acid - 180 results
The latest test result will replace the oldest when the records exceed maximum memory
capacity. The memories start record from M1 to M180.
Directions for Checking Memories:
No Test Strip in the Meter → Press Front Button (3 secs) → A Short "Beep" (Full
Display on Screen) → Press Front Button Again → Enter the Memory Mode →
Press Front Button for Next Test Record → Press Back Setting Button (3 secs)
to Turn Off
Memory Records are shown as follows:
Blink
Test Record
6