AccuScreens APM1024WTR Guia De Instalacion página 4

All manuals and user guides at all-guides.com
INSTALLING IN MASONRY WALLS
Wall must safely support at least four times the combined load of the
equipment and all attached hardware and components. Put the wall mount
flatly in the installing position,using it as template. Mark holes on the wall. Use
a 10.5mm drill bit pre-drill three 50mm deep holes deep, staying at least 1"
from masonry edges. Do not drill into mortar joints. Drill holes using a standard
drill at low speed. DO NOT USE a hammer drill.,Insert the wall anchor(G) into
the mounting holes, and lightly tap them flush to the wall with a hammer.
Securely mount the wall plate with supplied Long bolts(F). As shown in Fig2.
CAUTION:
Wall anchors are intended for installation in masonry walls
only. Don't use wall anchors in drywall to install bracket.
We are not responsible for any personal injury
or product damage due to mishandling,incorrect
���� ���
mounting, incorrect assembly or incorrect use of
this product.
4