Power Source - memorex iFlip Mi8000-BLK Manual Del Usuario

AC CONNECTION
Insert the small end of the AC adapter into the POWER IN jack (located on the side of
the unit). Connect the AC cord to the adapter and connect the other end to a wall outlet
having 120V AC, 60 Hz. AC Adapter, DC 12V Z
NOTES:
• The AC adapter supplied with the unit is polarized to help minimize the possibility
of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not
file or cut the wide blade. It is the user's responsibility to have an electrician replace
the obsolete outlet.
• Remove both the DC plug and the AC-IN plug to disconnect the AC adapter when
not in use.
• Only use the supplied AC Adapter which has the following specs: DC 12V Z
CHARGING THE INTERNAL BATTERY PACK
When the Mi8000 is operating on AC power (as described above), it will also charge
the internal battery pack. While the battery pack is charging, the Battery (Charging)
indicator will light amber. When the battery pack is full, the Fully Charged indicator will
light green.
NOTES:
• When the battery is low, the Battery (Charging) indicator will flash amber.
• Fully charge the battery pack (6.5 hours) before using it for the first time.
• Make sure the battery packs is charged at least once a year.
• When fully charged, the unit can be used for up to 5 hours.
• For iPod charging, please refer to page 7 for details.

POWER SOURCE

All manuals and user guides at all-guides.com
5
AC Outlet
AC Plug