Bigben PARTY PARTYBTMIC2 Manual De Instrucciones página 14

"Selfie" function
1. Once the speaker is switched on, briefly press the Mode 3 button to activate the "selfie"
function. You'll hear a brief sound signal.
2. Switch your device into Bluetooth mode and find the "shutter" function, then click on it to
connect. You'll hear a sound signal once the connection has been established.
3. Briefly press button 4 or 5 to take a photo using your phone's camera.
Please note that not all smartphones support this function, which depends on the operating
system used.
Technical specifications
Type
Speaker
Peak power
Effective power
Impedance of
the speaker
Inbound power
Signal/noise
ratio
Battery capacity
Battery power
EIRP
N.B.: The maximum connection distance is approximately 10 metres. Please place your
Bluetooth speaker as close as possible to this appliance to avoid the connection being
disturbed.
In an environment with electrostatic discharge, the device may turn off. The user must
then recharge the battery and reset the device.
Features
diameter 52 mm (5 W)
6 W
5 W
3 Ω
5 V/500 mA continuous
current
≥ 85 dB
1800 mAh
3.7 V, 1800 mAh, 6.66
Wh
5.09dBm
Type
Charging time
Battery life in
playback
Bluetooth
version
Bluetooth
frequencies
Speaker
frequencies
Battery type
Transmission
distance
Size
- EN 14 -
Features
approx. 5 hours
15 hours at 50% volume;
6 hours at 100% volume
5.0
2.40 - 2.80 GHz
80 Hz - 20 KHz
Lithium-ion battery
10 m
265*75*75 mm