Descargar Imprimir esta página

Publicidad

Enlaces rápidos

•Gen 2c
Evaluation Unit Assembly Guide
Rev. 2021-05-27

Publicidad

loading

Resumen de contenidos para Artemis Vision Gen 2c

  • Página 1 •Gen 2c Evaluation Unit Assembly Guide Rev. 2021-05-27...
  • Página 2 ENGLISH LIETUVIŲ BAHASA INDONESIA Warning! Before proceeding with installati Įspėjimas! Prieš pradėdami montavimo Peringatan! Sebelum melanjutkan on, read the safety information in the User darbus, atidžiai perskaitykite saugos in instalasi, bacalah informasi keselamatan Manual. formaciją naudojimo instrukcijose. dalam Manual Pengguna. DEUTSCH PORTUGUÊS BAHASA MALAYSIA...
  • Página 3 X 1 - CPU Power Assembly Monitor assembly (depending on 1 or 2 camera demo) Extrusion assembly Server Server power supply Monitor power cord Monitor HDMI to Displayport cable Server monitor cable RaPTr Evaluation Unit Assembly Guide - 2c | 1 ARTEMIS VISION...
  • Página 4 Insert extrusion ends and tighten set screws using small hex key (included) RaPTr Evaluation Unit Assembly Guide - 2c | 2 ARTEMIS VISION...
  • Página 5 Attach main unit Attach additional camera NOTE: Step 3 only applies to 2- camera system. Mount camera where desired. ARTEMIS VISION RaPTr Evaluation Unit Assembly Guide - 2c | 3...
  • Página 6 Attach monitor ARTEMIS VISION RaPTr Evaluation Unit Assembly Guide - 2c | 4...
  • Página 7 NOTE: Customer must supply hardware to mount the entire unit to a section of Unistrut, or post. Fastener diameter should not exceed hole diameter in angle brackets at top and bottom of extrusion assembly ARTEMIS VISION RaPTr Evaluation Unit Assembly Guide - 2c | 5...
  • Página 8 NOTE: Connect other end to Server PC USB Camera(s) x 1 or x 2 Displayport Monitor x 1 Ethernet from RaPT Scanner unit RaPTr Server (with included power supply) Customer-supplied Keyboard, Monitor and Mouse ARTEMIS VISION RaPTr Evaluation Unit Assembly Guide - 2c | 6...
  • Página 9 For more in-depth options and discussion of the software please refer to the RaPTr Set-up Guide and the RaPT Interfaces and Architectures documents, available on the desktop of the server, and on the Artemis Vision website here: https://www.artemisvision.com/logistics-solutions/barcode-scanning/ RaPTr Evaluation Unit Assembly Guide - 2c | 7...