Descargar Imprimir esta página

Button Functions - PNI Adventure F80 Dual LED Manual De Usuario

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
Technical specifications:
LED type: SST20 (spotlight), G5WS1071F (floodlight)
LED: 2 x 6W
Battery type: Li-Ion 18650 3.7 V
Battery capacity: 2200 mAh
Dimensions: Φ28 x 95mm
Weight: 168 gr
Material: anodized aluminum
Protection class: IP68
Light intensity: 1000 lumens (both LEDs on)
Range: up to 180 m
Continuous operation time: approx. 3 hours (100% LED intensity)
Magnet at the end
USB Type C cable for battery charging

Button functions:

1.
When the flashlight is off, briefly press the side button. The floodlight LED
will light up to 30% (120 Lumens).
2.
In this state, press the button again. The floodlight LED will light up 100%
(450 Lumens).
3.
Press the button again. The spotlight LED will light up 100% (600
Lumens).
4.
Press the button again. Both LEDs will light up to 100% intensity
(1000 Lumens). To save battery power, the floodlight LED will turn off
automatically after 40 seconds.
5.
Press the button again. The flashlight turns off.
Warnings:
Children are not allowed to operate the equipment without adult
supervision.
Do not point the light at human or animals' eyes.
Please use the correct battery as requested, do not use a different type of
battery, this may cause PCB damage problems.
Please take off the batteries from the equipment if you don't use it for a
long time.
3
EN

Publicidad

loading