How To Cook; Important - Newlux Air Power V20 Manual Del Usuario

How to cook

1. Select the PREHEAT menu to preheat the basket (without food).
2. Once the fryer is hot, place the food in the basket.
3. Select the desired menu by pressing its respective icon. The menu
will flash simultaneously with the start/pause button until the latter
has been pressed in order to start preparation. The control panel
will display the default temperature and time setting.
4. Select the temperature by pressing the [+] or [-] buttons. It is
recommended to follow the displayed temperature parameters
of the menu and control panel section.
5. Select the cooking time by pressing the [+] and [-] buttons which
increase or decrease by 1 minute each time you press each button.
It is recommended to follow the times indicated in the menus and
control panel section.
6. When the menu, time and temperature have been selected, press
the Start/Pause button to start cooking.
7. Once the cooking process has started, if you need to change the
temperature or time, press the Timer and Temperature buttons
located at the bottom of the panel and modify the settings you
need to change.
8. During the cooking process, remove the basket and shake or turn
the food one or more times to ensure even cooking and browning.
The display will show OPEN.
9. When cooking is finished, the fan will continue to run for 30 seconds
more for safety reasons. The display will show OFF, and five beeps
will be heard.

IMPORTANT:

and non-stick tray.
Depending on the food, the basket may be too heavy to shake. In this
case, be sure to place the basket on a stable, heat-resistant surface.
Then shake the food carefully.
If the food will not stir or cannot be turned due to the weight, use tongs
instead.
| 28
Be careful of hot steam when removing the basket