Using The Product - Johnson 40-6625 Manual De Instrucciones

8185H-All_Manuals 8/13/14 8:14 AM Page 7
Note:
• Pay attention to the polarity of the batteries.
• Used (discharged) batteries are hazardous waste and should be
disposed of properly.
• If the power indicator light is flashing, the batteries are low and
should be changed soon.

7. Using the Product

This base was specially designed for more extensive adaptability of
the laser. Both the laser and the base can be connected with a
standard tripod by 5/8"-11 thread and camera tripod by
1/4" – 20 thread. With the use of its base, the laser can be freely
rotated, elevated 2-1/2", hung on the wall, attached to a metal plate,
or connected on pipe with use of its strap.
1. As shown in fig. 1, take out the magnetic base.
2. As shown in fig. 2, install the laser on the base (1/4" – 20
thread) by rotating the connecting knob counter-clockwise.
©2014 Johnson Level & Tool - Rev. 3
All manuals and user guides at all-guides.com
Figure 1 Figure 2
7