Battery Change Indicator - CVS Health BP3MY1-2ECVS Manual De Instrucciones

6. Battery change indicator

All manuals and user guides at all-guides.com
Batteries almost discharged
When the batteries are approximately 75% used, the
battery symbol will flash as soon as the instrument is
switched on. Although the instrument will continue to
measure reliably, you should obtain replacement batteries.
Batteries discharged – replacements required
When the batteries are discharged, the battery symbol will
appear unblinking as soon as the instrument is switched
on. You cannot take any further measurements and must
replace the batteries.
1. Open the battery compartment at the bottom of the
instrument.
2. Replace all of the batteries at the same time. Ensure
they are inserted correctly, as shown on the symbols in
the compartment.
3. The memory retains all values although date and time
must be reset – the year number will flash automatically
after batteries are replaced.
4. To set date and time, follow the procedure described in
Section 4.2.
Note:
Use two new, Long-Life 1.5 V AAA batteries. Do not use
batteries beyond their expiration date. If the monitor is not
going to be used for a prolonged period, the batteries
should be removed.
21