Tabla de contenido
Publicidad
Step 9 – hinge bracket
Secure all six hinge brackets
of the hinge bracket faces outwards, using two 16mm screws
Step 10 – fitting doors
Align each hinge spring to its relevant hinge bracket and tighten
adjusted using
(J2)
screw.
Step 11 – security
Secure the safety strap
We suggest a number 12 round head screw of at least 5 cm in length be used in conjunction with a wall
fixing appropriate to the wall type (please note: wall fixings not included). If you are uncertain about
doing this, consult a builder.
WARNING: Failing to secure your wardrobe may cause injury to your loved ones.
care, maintenance and cleaning
Regularly check the tightness of bolts and tighten as necessary.
Check for damage which could render your wardrobe unsafe or cause splinters.
To clean use a damp cloth, avoiding the use of strong detergents or abrasives.
An occasional light application of a wax polish will help maintain a good appearance.
Replacement parts
The replacement parts listed below are available for your product. In the event that you require any of
these parts, please contact your local store or contact us at spares@cosatto.com
•
top panel
•
top bar
•
bottom panel
•
left side panel
•
right side panel
•
back panel
•
centre support panel
•
shelf unit
•
door
•
fixing pack
•
safety strap (inc. screw)
(J3)
to the six pre-drilled hinge bracket supports, ensuring the longer piece
(L)
to the rear of the wardrobe using the supplied screw and secure to your wall.
(B)
per hinge bracket.
(J1)
screw. Each door position can be
Publicidad
Tabla de contenido
