Rs232 Control; Web Ui Control; Access The Web Interface - AVARRO 0E-HDMIMX4 Manual

RS232 Control

Advanced users may need to control the matrix through RS232 serial
communication. Connect a control PC or control system to the RS232 port of
the Matrix. API command for RS232 control is available in the separate
document "API Command Set_0E-HDMIMX4". A professional RS232 serial
interface software (e.g. Serial Assist) may be needed as well.
Before executing the API command through RS232 serial connection, please
ensure RS232 interface of the device and the control PC are configured correctly.
Parameters
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control

Web UI Control

The Web UI designed for the matrix is available for switching control, general
and advanced settings. The Web UI is accessible through a browser with latest
version, e.g. Chrome, Firefox, Safari, Opera, IE10+, etc.

Access the Web Interface

1. Connect the IP CONTROL port of the matrix to the Ethernet switch, and
connect your PC to the same network.
Note: The IP mode of the matrix is DHCP, please ensure the Ethernet switch
is connected to a DHCP server.
2. Use the tool such as SmartSetGUI to search the IP address of the device
or send API command to get IP address (See the separate document "API
Command Set_0E-HDMIMX4").
For more information please call 1-833-574-9124 or email AVARRO@adiglobal.com
Value
115200 bps
8 bits
None
1 bit
None
11
··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us