Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• Do not connect the appliance to the mains without
checking that the voltage on the rating plate and that
of your household are the same.
• VERY IMPORTANT: Do not immerse the main
body of the appliance in water or any other
liquid.
• Don't allow children play with the appliance. Keep the
appliance out of the reach of children.
• Make sure neither the appliance nor the cable are in
direct contact with hot surfaces or objects.
• Do not leave it plugged in if it is not going to be used.
• Do not direct the stream steam to the people, animals,
appliances or electrical socket.
• Do not use it over materials that it could be sensible
to the steam.
• Do not use it over not treat wooden.
• If the cable were to deteriorate it must be changed by
an Authorised Service Centre.
INSTRUCTIONS OF USE
• Place the nozzle (5) or the flexible tube (10) in the front of the appliance according to the operation to
be performed. To do that align the two inner flanges of the nozzle with the guides of the frontal side
of the appliance and turn the nozzle clockwise to leave it correctly fixed.
• To use the round brushes (6) you must place it directly in the point of the nozzle (5-10) or through the
angular nozzle (7).
• To use the brush (8) place it in the point of the nozzle (5-10) or through the angular nozzle (7). This
brush is advisable to use with the included suede.
• To use the glass cleaning (9) place it in the brush (8) in this case you should not be use the suede, hook
the flanges and press it to leave it fixed.
• Open the lid (4) by turning it anticlockwise.
• Pour water using the cup (11) included.
• Replace the lid (4) by turning it clockwise.
• Connect the appliance to the mains, the indicator light (2) will light on and after a few seconds it will
be ready to use.
• To generate steam press the steam pusher (3) repeatedly.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains and it is cold.
• Clean the body of the blender with a cloth dampened in water.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces
of the appliance.
7
Publicidad
Tabla de contenido
