Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Max. load capacity: 181 kg
Padding size: 965 x 431 x 102 mm
Frame size: 1069 x 457 x 178 mm
Frame material: steel
Number of castors: 4 pcs.
Castor material: rubber
Castor diameter: 127 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This product is designed to be used as a workshop creeper. Thanks to the four big swivel castors, the
device can also be moved on cracked and uneven floor including one person (max. weight, see
chapter "specifications"), thus making it easier to carry out maintenance or service work on the
vehicle. Any other use does not correspond to the intended purpose and is not permitted.
SAFETY INFORMATIONS
Keep children and unauthorised persons away from the work area.
•
•
Do not let any children play with the tool or its packaging.
Do not use if there are broken, bent, cracked or damaged parts.
•
The product that appears that appears damaged in any way, or operates abnormally shall be
•
removed immediately from work area.
If the product has been subjected to a shock load (a load dropped suddenly, unexpectedly
•
upon it), immediately discontinue use until it has been inspected.
Only use this device for purpose that is described under chapter "Intended Use".
•
Make sure that the max. Load capacity (including person, tools, equipment, personal items) is
•
not exceeded. The max. Load capacity is listed under chapter "specifications".
Sit down carefully! Avoid shock loads from e.g. a jump on the seat.
•
•
Keep children away from this product! This product is not suitable for use by children.
Do not stand on the product or use it to carry any components.
•
MAINTENANCE AND CARE
Before use, check the product for damage and the castors for tight fit.
Clean the product as needed, only use mild, non-corrosive cleaners to clean the upholstery and
frame. Never put lubricant on the rollers!
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Workshop Creeper, Low Profile
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 2851
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
