Steren RAD-630 Manual De Instrucciones página 58

Aux functions
1. Manual Dial
In channel mode:
Perform programming DTMF dialing software or by manual programming
using the configuration using commands
In frequency mode:
1. Activate the DTMF dialing from the function menu in the display shows
DTMF
2. Press and enter the code number
*
3. Press the PTT button to other radios receive the ringtone
2. Dial Storage
1. Set DTMF tones dialing software, enter the code and activate the
DTMF function.
2. Define which of the two programming buttons is the storage dial button
(all information entered by the software will be stored in the radio.)
3. Press the button that I assign for marking
Storage on ET screen.
4. Enter the code number 01-32 (must correspond to those entered by
software) to send the tone radius automatically.
25 25