Firmware Update - Behringer X-TOUCH ONE Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
All manuals and user guides at all-guides.com
1.
Press and hold down any desired
button, and the text "ASSIGN" will
appear in the LCD display.
2.
With the button still held down,
rotate the encoder knob to select the
new MC function of the button from
the list. Then release the button.
3.
Repeat Steps 1 and 2 until all buttons
are assigned to your liking.
4.
Press the encoder knob again to
adjust the LCD contrast and LED
brightness and return to the normal
operation of the X-TOUCH ONE.
DAW SETUP
In your DAW software, select
the appropriate control surface
as follows:
MC - If you are using the
X-TOUCH ONE in an MC mode,
select Mackie Control (or Mackie
Control Universal) as the control
surface in your DAW. The X-TOUCH
ONE in MC mode emulates the
operation of the Mackie Control,
so this is the control surface you must
choose in your DAW. The different
MC operation modes are matched to
different DAWs. If you are not happy
with the pre-assignment, you can
choose "MC User" operation mode
and make your own assignment for
your DAW.
HUI - If you are using the
X-TOUCH ONE in a HUI mode,
select Mackie HUI as the control
surface in your DAW. Select HUI PRO
if you are using Pro Tools.
MIDI - If you are using the
X-TOUCH ONE in a MIDI mode, select
it in your DAW as a MIDI controller.
Become familiar with your DAW's
MIDI Learn functions, and you will
be able to map each button and
feature of the X-TOUCH ONE to a
function and control on your DAW,
or plug-in controls.

FIRMWARE UPDATE

Please check the X-TOUCH ONE
product page on our website for
any firmware updates. If there
is a firmware version later than
the currently-loaded firmware,
download the new file onto your
host computer. (The unit's firmware
version is briefly displayed after
power on.)
To enter the firmware update mode,
hold down the REC button in the
CHANNEL section in the top right
corner, while you turn on power to
the X-TOUCH ONE.
You will need a MIDI utility such
as MIDI OX in order to send the
firmware file using SysEx commands.
Follow the detailed instructions that
come with the firmware download.
37
Quick Start Guide

Publicidad

Tabla de contenido
loading

Tabla de contenido