Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Wiring
Warnings:
Before wiring, disconnect the power from the device.
During wiring, connect and disconnect the cables gently.
Steps for device wiring:
1.
Connect HDMI sources (such as Media player, Blu-ray player, etc.) to HDMI
IN 1~4 ports.
2.
Connect HDMI displays (TV, Monitor, Projector, etc.) to HDMI OUT 1~2
ports.
3.
Connect a digital audio receiver to S/PDIF OUT port, and connect an
analog audio receiver to AUDIO OUT port.
4.
Connect a control PC or control system to RS232 port (more information,
please refer to "RS232 Control" section).
5.
Connect to the power adapter provided.
6.
Power on all devices.
Note:
Slide the DIP switch to De-embedded mode, the S/PDIF OUT of OUTPUT
2 will output the digital de-embedded audio from HDMI OUT 2.
Slide the DIP switch to ARC mode, the S/PDIF OUT of OUTPUT 2 will
output the ARC audio from the TV connected to HDMI OUT 2.
For more information please call 1-833-574-9124 or email AVARRO@adiglobal.com
7
···
To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Publicidad
Tabla de contenido
