Blaupunkt BP 2.2 FHD Manual De Uso E Instalación página 32

FUNCTION
J. Parking Monitoring
Parking monitoring is for security monitoring while the vehicle is parked.
Once Parking Monitoring ON is selected in the video menu, the screen will display
the
the DVR detects any vibration, it will power ON to record for 20 seconds automatically
with a
there is continuous vibration, DVR will turn ON again to record for 20 seconds until the
built-in battery is drained completely. All videos created in Parking Monitoring mode
without external power supply will be available in the LOCKED folder in the Micro SD
card and not overwritten while the DVR is in loop recording.
If Parking Monitoring option is kept ON while the vehicle ignition is ON and the car
charger provides power, only the first video will be locked.
Three setting options are available (High, Medium & Low). Medium is most recommen-
ded.
K. Car Number Display
Long press
are total of 10 digits that can be entered. Select
ric information '0~9' and 'A~Z' for every digit. Once the correct information is entered,
press
tings.
Note: If Date Stamp is set to OFF, car number will not display on the screen and video
even if Car Number is set to ON.
Blaupunkt BP 2_2 Manual All Languages 04.indd 32
icon . Once the vehicle ignition is turned OFF, the DVR will power OFF. In case
key icon displayed at the top middle of the screen and then power OFF. If
UP/MENU key to set Car Number Display ON in the video menu. There
OK key to go to next digit and long press
DOWN/MODE key to enter nume-
UP/MENU key to exist set-
13.08.2021 11:51:06